Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. With the option to connect to an Ghost app and GPS tracking system, which can notify you via phone in the event that your vehicle is damaged with or stolen.
The installation of an Ghost immobiliser can be done by a trained technician. It is essential to have the proper equipment and heat shrink tubing.
Getting Started
Ghost immobilisers are a great alternative to physical theft devices such as car alarms and wheel locks. They protect your vehicle without using LED indicators or key fobs. Instead they connect directly to the ECU's CAN data network and can only be activated after entering a PIN sequence. This offers a higher level of protection against key hacking, ECU swapping and cloning.
In the end, installing a ghost immobiliser Birmingham has to be done with extreme agility and accuracy. It can be a bit like tiptoeing through an icy minefield. One mistake could cause severe damage to the circuits of the electrical system of your vehicle. To avoid this, it's vital that you understand the process of installation and prepare your vehicle appropriately.
First, you must prepare the vehicle by removing interior panels to make room for the immobiliser unit. Once Ghost 2 immobiliser have found the ideal location to conceal it, use cable ties to secure it. Clean up your wiring by tying loose wires down and using insulation tape to cover any exposed connections. This will reduce the risk of an accidental short circuit and improve the appearance and reducing the chance of theft.
Identify a constant source of 12V power, and a grounding source for the ghost immobiliser. Once you have located them check the power cables using a multimeter. Connect the CAN H and CAN L wires of the immobiliser to the grounding and power points.
It is crucial to ensure that all connections are checked and check the immobiliser for signs of corrosion. You should also test the system to make sure it is working properly by entering a PIN code and then starting the engine. This should be part of your routine, as it will allow you to detect any intermittent problems early. Regular testing can help to improve the longevity of the device and keep it operating at peak performance.
Preparing the vehicle
The installation of a Ghost immobiliser is a complex task that requires tools and understanding. A wiring diagram of the vehicle is essential to locate the right wires and making precise connections. A multimeter is a great tool to check the electrical properties and ensure security. Cable ties and insulation tape can be used to protect connections from being tampered with and keep them secured. Additionally, a user's manual will give you specific instructions tailored to the Ghost Immobiliser model you have.
Once installed the ghost immobiliser will prevent unauthorised engine start by requiring that the owner input a unique PIN code sequence using buttons on the steering wheel or center console. This can be done either manually or remotely through an app for mobile phones, and the code is able to be changed by the vehicle owner at anytime. The device is also silent and is undetectable to thieves because it does not emit radio frequencies.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs and shuts down the engine if a false signal is detected. The system is tamper-proof and weatherproof, with no key fobs or LED indicators to attract the attention of thieves.
It can be mounted behind the dashboard or in a hidden location, so that it isn't visible to thieves and doesn't hinder the performance of the vehicle. It can be mounted in a small container so it is less likely to be spotted by untrustworthy salespeople during a test drive.
Its discrete operation and integration with the vehicle's CAN bus network make it a powerful deterrent to modern methods of car theft, such as key cloning and signal relay attacks. Combining the system with other security measures will create a powerful barrier that will deter even the most persistent thieves. A growing number of insurance companies are recommending or require ghost immobilisers, as they can reduce the cost of insurance.
Making Connections
In contrast to traditional security systems that are heard by thieves ghost immobilisers are silent and stop them from knowing that your vehicle is turned on. They also stop the high-tech methods used to steal vehicles, such as OBD port hacking. They can also be installed without causing permanent marks in your vehicle making them a good option for those who are planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a CANbus immobiliser that is among the most reliable and advanced solutions to stop car theft. It makes use of the CAN data network to disable your engine and generates a PIN code that only you know, meaning it's hard for thieves to identify. It is compatible with many different vehicles, and it works with a variety of features already installed like car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you opt to use a Ghost immobiliser for your vehicle, be sure to consult the wiring diagram to identify the wires that connect. Verify the location of these wires to ensure accuracy and mark them with tape or labels to help you keep on track of them. You will also have to locate a consistent power source (12V) for the system and an earthing. Once you have all the components, you can begin making connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless you enter a pin code through the buttons of the dashboard or steering wheel. This will stop ECU hacking, key cloning, and other techniques of theft from vehicles. Additionally, it can be paired with other approved by Thatcham security devices, like alarms and tyre clamps to give your car an even greater degree of security.
As the UK automotive industry continues to grow as do the options available to secure your vehicle. There are so many ways for thieves to get into your car and steal it, therefore it's vital to do all you can to stop it from being stolen. Ghost immobilisers are a popular option among car owners who are responsible.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU which stops the engine from running until a specific PIN code is entered. This makes it difficult for thieves to copy your key fob to open your vehicle, and even difficult to disable the system by hacking its electronics.
Ghost Immobilisers are also able to be used in conjunction with GPS tracking devices that will help you track your vehicle's location and identify it in the event of theft. This is a feature that is not commonly found in security products that are sold aftermarket, but it is an excellent way to improve the security of your vehicle and give you peace of mind.
The Ghost-II immobiliser is not just a source of an enhanced security, but also a pleasant experience for the user, by getting rid of the need for additional key fobs or devices. It features a simple and intuitive PIN code entry system that seamlessly into your daily routine. Additionally, it provides options for deactivation and features that allow you to temporarily disable the immobiliser for valet parking or servicing.
Prepare the necessary tools and become familiar with the wiring of your vehicle. A basic set of hand tools will provide you with the flexibility to create precise connections, and a multimeter is a great tool to check electrical values. Insulation tape and heat-shrink tubing are essential to protect connections from short circuits. Cable ties can be used to secure wiring. It is also essential to work in a space that is well-lit, and wear protective gear when working with electrical components and tools.
You should test the Ghost immobiliser after you have completed the installation to verify that it's working correctly. First, you need to try to start the vehicle without entering the PIN code. If this doesn't work then you'll need to test again and examine the connections more carefully.
Contrary to other security devices unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than traditional deterrents such as wheel clamps or steering locks. It is TASSA-approved, and recognized by a few insurance companies. This makes it a cost-effective investment that will give you the peace of heart you deserve.